Atención: "Nuestra plataforma recopila información disponible públicamente en los diversos perfiles en los que participa la comunidad UCN. Si identifica errores u omisiones, le agradecemos que nos comunique sus observaciones ciencia.abierta@ucn.cl."

uri del icono

Arzúa Touriño, Javier

Académico

Posiciones

Académico, Departamento de Ingeniería Metalúrgica y Minas 2016 -

Áreas de investigación

Enfoque geográfico

Chile País

publicaciones seleccionadas

artículo editorial
- Variable Dilation Angle Models in Rocks, a Review. Applied Sciences. 2025
- An improvement in the method of correcting indirect radial strain measurements during triaxial strength tests in rocks. MethodsX. 2024
- Analytical and experimental studies on toppling behavior of blocks misaligned with the slope face. Bulletin of Engineering Geology and the Environment. 2024
- Evaluating the influence of backfilling on the stability of an abandoned room-and-pillar mine: a case study in northern Spain. Geomechanics and Geophysics for Geo-Energy and Geo-Resources. 2024
- Moving towards deep underground mineral resources: Drivers, challenges and potential solutions. Resources Policy. 2023
- Natural instability phenomena in granitic rock masses: slopes in decomposed granite, boulder fields and irregular large granitic boulders,Fenómenos de inestabilidad natural en macizos rocosos graníticos: laderas en jabre, campos de bolos y bolos irregulares de granito. BOLETÍN GEOLÓGICO Y MINERO. 2021
- Stability of an abandoned siderite mine: A case study in northern Spain. Open Geosciences. 2021
- Correcting indirect strain measurements in laboratory uniaxial compressive testing at various scales. Bulletin of Engineering Geology and the Environment. 2020
- Analytical model for predicting the UCS from P-wave velocity, density, and porosity on saturated limestone. Applied Sciences (Switzerland). 2019
- Analysis of a complex slope failure in a granodiorite quarry bench. Bulletin of Engineering Geology and the Environment. 2019
- Block toppling stability in the case of rock blocks with rounded edges. Engineering Geology. 2018
- Crack Damage Parameters and Dilatancy of Artificially Jointed Granite Samples Under Triaxial Compression. Rock Mechanics and Rock Engineering. 2018
- Analysis of size effects on the geomechanical parameters of intact granite samples under unconfined conditions. Acta Geotechnica. 2017
- Corrigendum to “Verification of a laboratory-based dilation model for in situ conditions using continuum models” [J Rock Mech Geotech Eng 6 (2014) 522–534] (S1674775514000869) (10.1016/j.jrmge.2014.09.004). Journal of Rock Mechanics and Geotechnical Engineering. 2017
- Geotechnical design of underground slate mines,Diseño geotécnico de minas subterráneas de pizarra. BOLETÍN GEOLÓGICO Y MINERO. 2017
- Strapping of pillars with cables to enhance pillar stability. Journal of the Southern African Institute of Mining and Metallurgy. 2017
- Triaxial strength and deformability of intact and increasingly jointed granite samples. International Journal of Rock Mechanics and Mining Sciences. 2017
- A Laboratory-Testing-Based Study on the Strength, Deformability, and Dilatancy of Carbonate Rocks at Low Confinement. Rock Mechanics and Rock Engineering. 2015
- Study of the stability against toppling of rock blocks with rounded edges based on analytical and experimental approaches. Engineering Geology. 2015
- Strength and dilation of jointed granite specimens in servo-controlled triaxial tests. International Journal of Rock Mechanics and Mining Sciences. 2014
- Verification of a laboratory-based dilation model for in situ conditions using continuum models. Journal of Rock Mechanics and Geotechnical Engineering. 2014
- Dilation in granite during servo-controlled triaxial strength tests. International Journal of Rock Mechanics and Mining Sciences. 2013
capítulo
- A lab-testing based geomechanical characterization of metamorphic rocks focusing on post-failure behavior 2014
- Stability analysis of a room & pillar hematite mine and techniques to manage local instability problems 2014
documento de conferencia
- Stability analysis of a calcareous rock slope on a variable dip syncline. New Challenges in Rock Mechanics and Rock Engineering - Proceedings of the ISRM Rock Mechanics Symposium, EUROCK 2024. 2024
- Grinding or not grinding, that is the question. Rock Mechanics for Natural Resources and Infrastructure Development- Proceedings of the 14th International Congress on Rock Mechanics and Rock Engineering, ISRM 2019. 2020
- Motorized tilt table based on arduino-controlled stepper motor. 54th U.S. Rock Mechanics/Geomechanics Symposium. 2020
- Numerical and experimental characterization of mechanical behaviour of an artificially jointed rock. ISRM International Symposium - EUROCK 2020. 2020
- Rock slope stability study case: Ruínas de Huanchaca south sector, Antofagasta, Chile. ISRM International Symposium - EUROCK 2020. 2020
- Size effect on granitic rocks featuring natural defects. 54th U.S. Rock Mechanics/Geomechanics Symposium. 2020
- Study of the mechanical behavior of intact and jointed rocks in laboratory with particular emphasis on dilatancy. ISRM International Symposium - 10th Asian Rock Mechanics Symposium, ARMS 2018. 2018
- An Assessment of the Post-peak Strain Behavior of Laboratory Intact Rock Specimens Based on Different Dilation Models. Procedia Engineering. 2017
- Characterization and numerical modelling of standard and cabled-strapped pillars in a haematite mine. ISRM AfriRock - Rock Mechanics for Africa. 2017
- Sensitivity Analysis of the Micro-Parameters Used in a PFC Analysis Towards the Mechanical Properties of Rocks. Procedia Engineering. 2017
- Stability Analysis of an Over-tilted Slope in a Granite Quarry: The Role of Joint Spacing. Procedia Engineering. 2017
- Numerical simulation of the stress-strain behavior of intact granite specimens with particle flow code 2016
- On the application of rockfall risk assessment techniques from field observation and quarry experience. 50th US Rock Mechanics / Geomechanics Symposium 2016. 2016
- The role of tilting rate and wear of surfaces on basic friction angle testing 2016
- Back-analyses of failures and support redesign of a magnesite room-and-pillar mine excavated in stratified rock. 13th ISRM International Congress of Rock Mechanics. 2015
- Compressive strength tests of cabled rock specimens as pillar analogues. ISRM Regional Symposium, EUROCK 2015. 2015
- Effect of scale and structure on the strength and deformability of rocks. 13th ISRM International Congress of Rock Mechanics. 2015
- Effect of time and wear on the basic friction angle of rock discontinuities. ISRM Regional Symposium, EUROCK 2015. 2015
- Strain-softening characterization of granitic rocks and numerical simulation of servo-controlled strength tests. ISRM International Symposium - EUROCK 2013. 2013
- Impact of post-failure rock mass behavior on excavation response. 46th US Rock Mechanics / Geomechanics Symposium 2012. 2012

correo electrónico principal

javier.arzua@ucn.cl

correos electrónicos adicionales

javierarzua@gmail.com

página web

ORCID

https://orcid.org/0000-0002-2173-5546

OpenAlex

https://openalex.org/authors/a5077709756

Publicaciones en VIVO

Mapa de la ciencia

Información de Contacto

javier.arzua@ucn.cl

javierarzua@gmail.com

Sitios web